Jump to content


Photo
- - - - -

05-06 Corolla/Matrix XRS Stock ECU: It's real and it's here!

reflash xrs 2zzge 2zz tune lift

  • Please log in to reply
4 replies to this topic

#1 Redliner9k

Redliner9k

    Senior Member

  • Members
  • 102 posts
  • LocationPuerto Rico

Posted 13 November 2016 - 11:39 PM

Hi guys,

 

Been away from forums for a while, but certainly not way from cars and tuning. Some of you might have seen this, but wanted to share it with you guys. What was once a dream is now a reality. I'm able to reflash the stock ECU and fully tune it (similar capabilities as to having a Power FC). These are the parameters I can adjust:

 

1) Lower Lift

2) VVT-i phasing

3) Fuel

4) Ignition Timing

5) Raise Rev Limiter

6) Disable CEL Codes

7) Launch Control

 

This is only available for 05-06 Corolla/Matrix ECU's (2003-2004 are not reflashable). The following dyno is stock ECU (no tuning) versus reflashed ECU.

 

15032922_1214832841906081_29970247993745

 

Mods:

- PPE 3" Intake

- R9K 4-1 Header

- 2.5" Exhaust (Catless)

 

Got any questions let me know guys!  :)

 


Latest Developments

http://www.facebook.com/r9ktuned
 


#2 EricTMah

EricTMah

    Senior Member

  • Moderators
  • 649 posts
  • Vehicle(s):05 Corolla XRS - Sleeping
    16 Kia Soul

Posted 14 November 2016 - 10:52 AM

Hi guys,

 

Been away from forums for a while, but certainly not way from cars and tuning. Some of you might have seen this, but wanted to share it with you guys. What was once a dream is now a reality. I'm able to reflash the stock ECU and fully tune it (similar capabilities as to having a Power FC). These are the parameters I can adjust:

 

1) Lower Lift

2) VVT-i phasing

3) Fuel

4) Ignition Timing

5) Raise Rev Limiter

6) Disable CEL Codes

7) Launch Control

 

This is only available for 05-06 Corolla/Matrix ECU's (2003-2004 are not reflashable). The following dyno is stock ECU (no tuning) versus reflashed ECU.

 

15032922_1214832841906081_29970247993745

 

Mods:

- PPE 3" Intake

- R9K 4-1 Header

- 2.5" Exhaust (Catless)

 

Got any questions let me know guys!  :)

 

Amazing Red!!!

 

What kind of cost are we looking at and turn around time?


Posted Image

#3 dmsyr

dmsyr

    Assy McGee

  • Moderators
  • 3,316 posts
  • LocationAlbuquerque, NM
  • Vehicle(s):That slammed 3p1 XRS
    04 Saturn Vue (RIP 10-30-2015)
    2013 Chevy Equinox

Posted 16 November 2016 - 04:20 PM

It's 300 bucks. Don't know turnaround time though


Injen,Redliner9k PPE header,2.5 custom exhaust,ES MM Inserts, Ksport coilovers,TRD quickshifter,custom painted carbon fiber hood,headlight projector retrofit,6000k lows,4300k fogs,Altis grille,Altis 2nd gens,Altis roof spoiler,PR LIP,VG Sharkfin antenna,Altis duckbill spoiler,ESAM visors,Ultra Racing 4 pt. strut bar,Aodhan AH05 wheels
'03 Matrix XRS ECU-LIFTing at 6200

scoottuned reflash - LIFTing at 5500

BOLTED AND SLAMMED


#4 Phantom_xrs

Phantom_xrs

    Senior Member

  • Members
  • 148 posts
  • LocationInland Empire, California
  • Vehicle(s):2005 Corolla XRS
    2002 Tacoma TRD PreRunner

Posted 18 November 2016 - 02:55 AM

I can attest to the reflash. Although I don't know if launch control will be able to happen before lift. I had him set my launch control to 5k and it would rev limit there at WOT because it was set before lift. So I'll ask him to set launch control to 6k like the Corolla in his video and it should work.
03 Matrix XRS ECU and/or Reflashed Corolla Xrs Ecu
Injen CAI
2.5" Custom Exhaust(decat) Vibrant resonator and Magnaflow muffler
PPE R9K 4-2-1 Race Header
MWR Underdrive Pulleys
ENERGY MM Inserts
BC BR Coilovers with Swift Springs
ACT Stage 2 Clutch

IG: phantom_xrs

#5 Redliner9k

Redliner9k

    Senior Member

  • Members
  • 102 posts
  • LocationPuerto Rico

Posted 18 November 2016 - 03:01 AM

Hi Guys,

 

Turn around time is about 1-2 days from my side. Rest of the lead time is shipping.


Latest Developments

http://www.facebook.com/r9ktuned
 






Also tagged with one or more of these keywords: reflash, xrs, 2zzge, 2zz, tune, lift

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users